Country: UK
United StatesCanadaUnited Kingdom

River Tyne at Spilmersford: level & flow

River gauge in Scotland · All River Tyne gauges

0.44m³/s
15.4 cfs · gauge 0.509 m · what is cfs?
Measured · provisional
Normal for the dateFalling
24 hours
0 m³/s
7 days
0 m³/s
Normal for Oct 22 ?
0.72 m³/s
Water temp ?
Not measured

At a glance · Oct 22

About normal

The River Tyne at Spilmersford is flowing within its normal range for Oct 22.

  • This week↗ Rising 0.14 m³/s

Compared with this gauge's own records for the same date. A statistical guide, not advice.

Today compared with past years on Oct 22

Usual range (10th–90th percentile): 0.35–2.94 m³/sNormal (25th–75th percentile): 0.40–1.61 m³/sToday: 0.44 m³/sToday 0.44 m³/sMedian 0.7210th90th25th75th
Usual range (10th–90th percentile): 0.35–2.94 m³/sNormal (25th–75th percentile): 0.40–1.61 m³/sToday: 0.44 m³/sToday 0.44 m³/sMedian 0.7210th90th25th75th
Ratio scale: equal steps are equal multiples, because flow varies so much.

Flow today against this gauge's percentiles for the date (61 years). A statistical guide, not advice.

Angling level guide

A statistical guide from this gauge's own history: "low" is below the 25th percentile for Oct 22, "high" above the 75th, "good" in between. It is not advice: check conditions on the bank, local club rules and any flood warning.

What this means

Flow is below the Oct 22 median of 0.72 m³/s (61 years of data).

It has risen 0.04 m³/s in the past 24 hours.

The highest annual peak on record is 56.9 m³/s (Nov 7, 2000).

Flow chart

Loading chart…

Measured Normal range for the date (middle 50% of past years)

Flood status

Flood warnings in Scotland are issued by SEPA, not by this website. Check Floodline Scotland for warnings in force.

Records

Highest annual peak flow
56.9 m³/s (Nov 7, 2000)
Highest annual peak stage
2.484 m (Nov 7, 2000)
Lowest daily flow, last 5 years
0.18 m³/s (Jul 23, 2026)
Normal range for Oct 22
0.40 m³/s – 1.61 m³/s (61 years)

Up & downstream